D-Link M30 - Firewall Settings - Ipv4;Ipv6 Rules

73D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Firewall Settings - IPv4/IPv6 Rules
The IPv4/IPv6 Rules section is an advanced option that lets you congure what trac is allowed to pass through the network.
Go to Features > Firewall, then click the IPv4 Rules tab or the IPv6 Rules tab to congure rules for ltering the inbound/
outbound trac based on parameters like IP address with ports.
To congure the Firewall Advanced settings, click the Advanced
link. Refer to Firewall on page 72.
To begin, use the drop-down menu to select whether you want to
ALLOW or DENY the rules you create. You can also choose to turn
OFF ltering.
To remove a rule, click on the trash can icon in the Delete column.
To edit a rule, click on the pencil icon in the Edit column.