77D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Name: Enter a name for the rule. Alternatively, select the protocol/
Application from the drop-down menu. Depending on a requested
service, the router redirects the external service request to an
appropriate internal host.
Local IP: Enter the IP address of the device on your local network to which
the external port will forward. Alternatively, select the device from
the drop-down menu.
Protocol: Select a trac protocol to allow or deny (TCP, UDP, Both, or Other).
Protocol Number: If you select Other as the protocol, enter the protocol number.
External Port: If you select TCP, UDP, or Both as the protocol, enter the public
port you want to forward.
Internal Port: If you select TCP, UDP, or Both as the protocol, enter the private
port you want to open.
Schedule: Use the drop-down menu to select a time schedule that the rule will
be enabled on. The schedule may be set to Always Enable, or you
can create your own schedules in the Schedule section. Refer to
Time & Schedule - Schedule on page 84 for more information.
To create a new rule, click the Add Rules button. Click Apply when you are done. If you edit or create a rule, the following
options will appear:
Port Forwarding - Virtual Server
To Next Page
Loading...
Need help?
General
