D-Link M30 - Static Routes - Ipv6

79D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
To congure IPv6 routes, click IPv6 on the Static Routes page. To return to the
main IPv4 static routes page, click IPv4.
To remove a rule, click on the trash can icon in the Delete column. To edit a
rule, click on the pencil icon in the Edit column. To create a new rule, click the
Add Rules button. Click Apply when you are done. If you edit or create a rule,
the following options will appear:
Name: Enter a name for the route.
DestNetwork: This is the IP address of the router used to reach the specied
destination.
PrexLen: Enter the IPv6 address prex length of the packets that will take
this route.
Gateway: Enter your next hop gateway to be taken if this route is in use.
Metric: The route metric is a value from 1 to 16 that indicates the cost of
using this route. A value of 1 represents the lowest cost and 16 the
highest cost.
Interface: Select an interface that the IP packet must use to transit out of the
router when this route is in use.
Static Routes - IPv6