D-Link M30 - Guest Zone Network Setup

60D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Guest Zone
The Guest Zone feature will allow you to create a temporary wireless network for guests to access the Internet. This zone will
be separate from your main Wi-Fi network.
In the Settings menu on the left side of the page, click Wireless, then click the Guest Zone link. Click Save at any time to
save the changes you have made on this page.
If Smart Connect Status is Enabled in the previous Wireless settings, congure the following for both radio
frequencies. If it is Disabled, congure the following for 2.4GHz and 5GHz individually.
Wireless
Status: Enable or disable the Guest Wi-Fi network.
Wi-Fi Name
(SSID):
Enter a name for your guest wireless network.
Password:
Schedule:
Create a password for your guest Wi-Fi network. Wireless clients will
need to enter this password to successfully connect to the network.
Select the time during which the wireless network will be available.
The schedule may be set to Always Enable or you can add your own
schedule.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at the top
of each column. To add a time period to the schedule, simply click on
the start time and drag to the end time. You can add multiple days and
multiple periods per day to the schedule.