D-Link M30 - Page 37

33D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
IPv4 - PPPoE
Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the
Internet. Click Save at any time to save the changes you have made on this page.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Reconnect Mode: Select either Always on, On Demand, or Manual.
Maximum Idle
Time:
Congurable when On Demand is selected. Enter a maximum
idle time for the Internet connection to be maintained
during inactivity. To disable this feature, select Always on or
Manual as the reconnect mode. The default time is 5 minutes.
Advanced Settings...
Address Mode: Select Static IP if your ISP assigned you an IP address, subnet mask,
gateway, and DNS server addresses. In most cases, however, select
Dynamic IP.
If you select Dynamic IP as the Address Mode:
Service Name: Enter the ISP service name (optional).
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP. This
address is usually automatically obtained from your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
This address is usually automatically obtained from your ISP.
MTU: Maximum Transmission Unit (1280~1500)- The default is 1492. You
may need to change the MTU for optimal performance with your ISP.