D-Link M30 - Page 43

39D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
IPV4 - DS-Lite
DS-Lite allows local IPv4 packets to travel through an IPv6 network. After selecting DS-Lite, the following parameters will be
available for conguration. Click Save at any time to save the changes you have made on this page.
DS-Lite
Conguration:
Select DS-Lite DHCPv6 Option to let the router allocate the AFTR
IPv6 address automatically. Select Manual Conguration to enter
the AFTR IPv6 address manually.
B4 IPv6 Address: Enter the Basic Bridging Broadband (B4) IPv4 address that
will be encapsulated into IPv6 packets to transmit over an
IPv6 network.
WAN IPv6 Address: Once connected, the WAN IPv6 address will be displayed here.
IPv6 WAN Default
Gateway:
Once connected, the IPv6 WAN default gateway address will be
displayed here.
AFTR IPv6 Address: Enter the Address Family Transition Router (AFTR) IPv6 address.
This is where an IPv6 packet will be decapsulated.
B4 IPv6 Address: Enter the B4 IPv4 address value used here.
WAN IPv6 Address: Once connected, the WAN IPv6 address will be displayed here.
IPv6 WAN Default
Gateway:
Once connected, the IPv6 WAN default gateway address will be
displayed here.
Advanced Settings...
DS-Lite DHCPv6
Manual Conguration