D-Link M30 - Page 62

58D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Security Mode: Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/
WPA3-Persoanl, or WPA3-Personal. WPA3 provides the highest
level of encryption among these. Note that WPS will be disabled if
WPA3 is used.
802.11 Mode
(5GHz):
Select a desired wireless networking standard to use. The available
options for the 5 GHz wireless network are Mixed 802.11a/n/
ac/ax, Mixed 802.11a/n/ac, Mixed 802.11a/n, 802.11ac only,
802.11a only, or 802.11n only.
Wi-Fi Channel: Select a desired channel: 36, 40, 44, 48, 149, 153, 157, 161, or 165.
The default is Auto (recommended).
DFS Channel: If Auto Channel is selected, select this option to help nd one with
the least interference.
Transmission
Power:
Select a desired wireless transmission power: High, Medium, or
Low.
Channel Width
(5GHz):
Select Auto 20/40/80/160MHz if you are using 802.11ax, 802.11ac,
802.11n, and 802.11a devices, select Auto 20/40/80MHz if you are
using 802.11n and 802.11a devices, select 20/40 MHz if you are
using 802.11a devices, or select 20 MHz if you are using 802.11n
devices.
Visibility Status: The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Schedule: Select the time during which the wireless network will be available.
The schedule may be set to Always Enable or you can add your
own schedule.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at the
top of each column. To add a time period to the schedule, simply
click on the start time and drag to the end time. You can add
multiple days and multiple periods per day to the schedule.
5 GHz - Advanced Settings...