D-Link NUCLIAS CONNECT DAP-2680

22D-Link DAP-2680 User Manual
Web User Interface
WPA Mode When Authentication setting is set to WPA-
Enterprise, click the drop-down menu to select
one of the following: Auto (WPA or WPA2),
WPA2 Only, or WPA Only.
Auto (WPA or WPA2) allows the device to select
either setting to match the client conguration.
Cipher Type Click the drop-down menu to select the cipher
type for the WPA setting, type: Auto, AES, or
TKIP.
Group Key Update
Interval
Enter the interval period in seconds in which the
interval period is valid.
Network Access
Protection
Click the radio button to enable or disable
Microsoft Network Access Protection.
RADIUS Server Mode: Choose either external or internal.
RADIUS Server Enter the IP address of the RADIUS server to be
used to authenticate.
RADIUS Port Enter the RADIUS port.
RADIUS Secret Enter the shared secret to be used between the
radius server and the DAP to authenticate.
Accounting Mode Click the drop-down menu to enable or disable
the accounting mode.
Accounting Server Enter the IP address of the accounting server.
Accounting Port Enter the accounting port.
Accounting Secret Enter the accounting secret.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.