124D-Link DIR-850L User Manual
Section 5 - Connecting to a Wireless Network
Connect a Wireless Client to your Router
WPS Button
The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most
wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the DIR-850L router. Refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-850L for about one second. The Power LED on the front will start to blink.
Step 2 - Within two minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
Step 3 - Allow up to one minute for your connection to be congured. Once the Power LED stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
WPS Button
To Next Page
Loading...
Need help?
General
