EasyManuals Logo

D-Link Wireless AC1200 User Manual

D-Link Wireless AC1200
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
30D-Link DIR-850L User Manual
Section 3 - Conguration
The Host Name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Enter the Primary DNS Server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Enter the Secondary DNS Server IP address assigned by your ISP.
This address is usually obtained automatically from your ISP.
Maximum Transmission Unit - by default this eld will be set to
Auto. Select Manual if you need to change the MTU for optimal
performance with your ISP.
The default MAC address is set to the Internet ports physical interface
MAC address on the router. You can use the drop-down menu to
replace the Internet ports MAC address with the MAC address of a
connected client.
Click Save when you are done.
Host Name:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
MAC Address
Clone:
Dynamic IP (DCHP)
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP
does not provide you with an IP address to use.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless AC1200 and is the answer not in the manual?

D-Link Wireless AC1200 Specifications

General IconGeneral
Wireless Speed1200 Mbps
LAN Ports4 x 10/100/1000 Mbps
WAN Port1 x 10/100/1000 Mbps
Wireless Standard802.11ac
Frequency Bands2.4 GHz, 5 GHz
SecurityWPA, WPA2
Antenna TypeExternal

Related product manuals