4D-Link DIR-850L User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1 USB Port Connect a USB ash drive to share content throughout your network.
2 WPS Button Press to start the WPS process. The Power LED will start to blink.
3 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices, and video game consoles.
4 Internet Port Connect your broadband modem to this port using an Ethernet cable.
5 Power Button Press the power button to power the router on and o.
6 Power Port Connect the supplied power adapter to this port.
7 Reset Button Press and hold the reset button with a paper clip for about six seconds to reset the router to the factory default settings.
1
2
3
4
5
6
7
To Next Page
Loading...
