D-Link Wireless AC1200 User Manual

39D-Link DIR-850L User Manual
Section 3 - Conguration
Auto Detection
Select Obtain DNS server address or Use the following DNS.
If you selected Use the following DNS, enter the Primary DNS
Server address.
If you selected Use the following DNS, enter the Secondary DNS
Server address.
Enable or disable prex delegation services.
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for
the router.
Displays the router’s LAN IPv6 Link-Local Address.
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable or disable Automatic DHCP-PD in LAN services.
Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful
DHCPv6.
Enter the IPv6 address lifetime (in minutes).
Click Save when you are done.
DNS Type:
Primary DNS
Server:
Secondary DNS
Server:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic
IPv6 Address
Assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconguration
Type:
Router
Advertisement
Lifetime:
This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you
to change some settings on your side before your router can connect to the IPv6 Internet.

D-Link Wireless AC1200 Specifications

General

Wireless Speed	1200 Mbps
LAN Ports	4 x 10/100/1000 Mbps
WAN Port	1 x 10/100/1000 Mbps
Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Security	WPA, WPA2
Antenna Type	External