70D-Link DIR-850L User Manual
Section 3 - Conguration
Management
Time & Schedule
Time
The Time page allows you to congure, update, and maintain the correct time on the DIR-850L's internal system clock.
The router's internal clock is used for data logging and schedules.
From the Management menu, click Time & Schedule.
Select your Time Zone from the drop-down menu.
Displays the current Date and Time.
Enable or disable daylight saving time.
Enable to allow an NTP (Network Time Protocol) server on the Internet
to synchronize the time and date with your router. If you enable this
option, select an NTP server from the drop-down menu. Or, you can
select Manual from the drop-down menu and manually enter the
NTP Server.
Note: To congure the router’s time and date manually, disable the
Update Time Using NTP Server option and use the drop-down menus
that appear to input the time and date.
Click Save when you are done.
Time Zone:
Time:
Enable Daylight
Saving:
Update Time
Using an NTP
Server:
To congure and manage your schedules, click Schedule and refer to page 71.
To Next Page
Loading...
Need help?
General
