72D-Link DIR-850L User Manual
Section 3 - Conguration
System Log
Enable to send the router logs to a SysLog Server. If this is disabled,
there will be no other options on this page.
Enter the IP address for the Syslog server. If the Syslog server is
connected to the router, you can select it from the drop-down menu
to automatically populate the eld.
Enable this option if you want the logs to be automatically sent to
an e-mail address. Then enter the settings for your e-mail account.
These can be obtained from your e-mail service provider.
If e-mail notication is enabled, you may also enable this option.
When the log is full, the router will send it by e-mail.
Enable to send an e-mail according to a specied schedule.
If you enable Send on Schedule, use the drop-down menu to select
the schedule that the rule will be enabled on. The schedule may be
set to Always Enable, or you can create your own schedule from the
Schedules section (refer to page 71).
Click Save when you are done.
Enable Logging
to Syslog
Server:
Syslog Server IP
Address:
Enable E-mail
Notication:
Send When Log
Full:
Send on
Schedule:
Schedule:
The router keeps a running log of events. The logs can be sent to a Syslog server, and delivered to your email address.
From the Management menu, click System Log.
To Next Page
Loading...
Need help?
General
