D-Link Wireless AC1200 User Manual

45D-Link DIR-850L User Manual
Section 3 - Conguration
IPv6 in IPv4 Tunnel
Enter the Remote IPv4 address you will use.
Enter the Remote IPv6 address you will use.
Displays the Local IPv4 address.
Enter the Local IPv6 address you will use.
Enter the Subnet Prex Length supplied by your ISP.
Select either Obtain DNS server address or Use the following DNS.
If you selected Use the following DNS above, enter the Primary
DNS Server address.
If you selected Use the following DNS above, enter the Secondary
DNS Server address.
Enable or disable prex delegation services.
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
router.
Displays the router’s LAN IPv6 Link-Local Address.
Remote IPv4
Address:
Remote IPv6
Address:
Local IPv4
Address:
Local IPv6
Address:
Subnet Prex
Length:
DNS Type:
Primary DNS
Server:
Secondary DNS
Server:
Enable DHCP-
PD:
LAN IPv6
Address:
LAN IPv6 Link-
Local Address:
You can congure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6
packets can be sent over an IPv4 infrastructure.

D-Link Wireless AC1200 Specifications

General

Wireless Speed	1200 Mbps
LAN Ports	4 x 10/100/1000 Mbps
WAN Port	1 x 10/100/1000 Mbps
Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Security	WPA, WPA2
Antenna Type	External