D-Link Wireless AC1200 User Manual

40D-Link DIR-850L User Manual
Section 3 - Conguration
Static IPv6
Enable or disable the Link-Local Address. (If you enable this option,
you can skip the description of the next two elds.)
If you disabled Use Link-Local Address, enter the IPv6 Address
supplied by your ISP.
If you disabled Use Link-Local Address, enter the Subnet Prex
Length supplied by your ISP.
Enter the Default Gateway for your IPv6 connection.
Enter the Primary DNS Server address.
Enter the Secondary DNS Server address.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN IPv6 Link-Local Address.
Enable or disable the Automatic IPv6 Address Assignment feature.
Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful
DHCPv6.
Use Link-Local
Address:
IPv6 Address:
Subnet Prex
Length:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic
IPv6 Address
Assignment:
Autoconguration
Type:
Select Static IP if your IPv6 information is provided by your Internet service provider (ISP).

D-Link Wireless AC1200 Specifications

General

Wireless Speed	1200 Mbps
LAN Ports	4 x 10/100/1000 Mbps
WAN Port	1 x 10/100/1000 Mbps
Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Security	WPA, WPA2
Antenna Type	External