73D-Link DIR-850L User Manual
Section 3 - Conguration
Admin
This page allows you to change the administrator (Admin) settings, like reset the Admin password and enable remote
management.
From the Management menu, click System Admin.
Enter a new Password for the administrator account. You will need to
enter this password whenever you congure the router using a web
browser.
Enables a challenge-response test designed to prevent online hackers
and unauthorized users from gaining access to your router’s network
settings.
Check to enable HTTPS to connect to the router securely. This means
to connect to the router, you must enter https://192.168.0.1 instead
of http://192.168.0.1.
Remote management allows the DIR-850L to be congured from the
Internet by a web browser. A password is still required to access the web
management interface.
The port number used to access the DIR-850L is used in the URL.
Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address
of the DIR-850L and 8080 is the port used for the web management
interface. If you enable HTTPS Server, you must enter https:// as part
of the URL to access the router remotely.
Click Save when you are done.
Password:
Enable
Graphical
Authentication
(CAPTCHA):
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
To load, save, or reset the settings, or to reboot the router, click System and refer to page 74.
To Next Page
Loading...
Need help?
General
