D-Link Wireless AC1200 - Local Connectivity Only

50D-Link DIR-850L User Manual
Section 3 - Conguration
Local Connectivity Only
Click to enable Unique Local IPv6 Unicast Addresses settings.
When ULA is enabled, you may also enable automatic conguration
of the ULA prex.
Will display the Current ULA Prex.
Will display the LAN IPv6 ULA.
Click Save when you are done.
Enable ULA:
Use Default
ULA Prex:
Current ULA
Prex:
LAN IPv6 ULA:
Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet. For this Internet Connection type, you
must click on Advanced Settings... to see the required elds below.