EasyManuals Logo

D-Link Wireless AC1200 User Manual

D-Link Wireless AC1200
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
55D-Link DIR-850L User Manual
Section 3 - Conguration
DHCP Lease
Time:
Always
Broadcast:
WAN Port
Speed:
UPnP:
IPv4 Multicast
Streams:
IPv6 Multicast
Streams:
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
Enter the length of time for the IP address lease in minutes.
Enable this feature to broadcast your networks DHCP server to LAN/
WLAN clients.
You may set the port speed of the Internet port to 10 Mbps, 100
Mbps, 1000 Mbps, or Auto (recommended).
Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software and peripherals.
Enable to allow IPv4 multicast trac to pass through the router from
the Internet.
Enable to allow IPv6 multicast trac to pass through the router from
the Internet.
Click Save when you are done.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless AC1200 and is the answer not in the manual?

D-Link Wireless AC1200 Specifications

General IconGeneral
Wireless Speed1200 Mbps
LAN Ports4 x 10/100/1000 Mbps
WAN Port1 x 10/100/1000 Mbps
Wireless Standard802.11ac
Frequency Bands2.4 GHz, 5 GHz
SecurityWPA, WPA2
Antenna TypeExternal

Related product manuals