EasyManuals Logo

D-Link Wireless AC1200 User Manual

D-Link Wireless AC1200
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
61D-Link DIR-850L User Manual
Section 3 - Conguration
Click to enable PPTP, which will allow multiple machines on the
LAN to connect to their corporate network using the PPTP protocol.
Enable to allow multiple VPN clients to connect to their corporate
network using IPSec. Some VPN clients support traversal of IPSec
through NAT. This Application Level Gateway (ALG) may interfere
with the operation of such VPN clients. If you are having trouble
connecting with your corporate network, try turning this ALG o.
Check with the system administrator of your corporate network to
nd out whether your VPN client supports NAT traversal.
Enable to allow applications that use Real Time Streaming Protocol
(RTSP) to receive streaming media from the Internet.
Enable to allow devices and applications using VoIP (Voice over IP)
to communicate across NAT. Some VoIP applications and devices
have the ability to discover NAT devices and work around them. This
Application Level Gateway (ALG) may interfere with the operation of
such devices. If you are having trouble making VoIP calls, try turning
this ALG o.
Click Save when you are done.
PPTP:
IPSec (VPN):
RTSP:
SIP:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless AC1200 and is the answer not in the manual?

D-Link Wireless AC1200 Specifications

General IconGeneral
Wireless Speed1200 Mbps
LAN Ports4 x 10/100/1000 Mbps
WAN Port1 x 10/100/1000 Mbps
Wireless Standard802.11ac
Frequency Bands2.4 GHz, 5 GHz
SecurityWPA, WPA2
Antenna TypeExternal

Related product manuals