DAELIM S2 125 - Page 46

4-7
LUBRICATION SYSTEM
RADIATOR
REMOVAL
●Remove the front cover. (⇨3-5)
●Remove the front wheel. (⇨12-4)
●Loosen the 2 oil bolts and the 4 drain cock packings
from the main pipe bracket.
●Loosen the 3 flange bolts securing the radiator.
●Remove the radiator.
INSPECTION
●Check the oil line connections for leaks.
●Check the oil cooler for bent or collapsed fins.
Straighten the bent or collapsed fins with a suitable,
small, blade-type screw driver if necessary.
●Check the air passages for clogging or restriction. Blow
dirt out from between core fins with compressed air or
wash off dirt with water.
●After installing, start the engine and check for leak. Stop
the engine and check the oil level.
FIN
OILRADIATOR
RADIATORRUBBER
RADIATORCOLLAR
FLANGEBOLT
•Be careful not to damage the radiator when removing it.
•Pay attention not to turn over the vehicle.
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR
RADIATOR