DAELIM VJF125 - Page 110

6-9
COOLING SYSTEM
Install the water pump cover.
Install in the reverse order of removal.
Check the coolant checking hole.
Check the water pump body and O-ring for
damage and wear.
MECHANICAL SEAL REPLACEMENT
Remove water pump assembly from the inside by
tool.
Replace the mechanical seal with new one.
WATER PUMP / IMPELLER INSTALLATION
When the mechanical seal in replaced, a new seal
washer must be installed to the impeller.
Install in the reverse order of removal
• The mechanical seal and the seal washer change
with a set.
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
O-RING
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
CHECKING HOLE
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL
MECHANICAL SEAL