15-10
REAR WHEEL/REAR SUSPENSION
ASSEMBLY
DISASSEMBLY/INSPECTION
Remove the upper and lower screws and chain slider.
Check the chain slider for wear or damage.
Remove the dust seal caps pivot distance center collar
and bush.
Check the dust seal caps, center collar and bush for
wear or damage.
Apply grease to the center collar, bearing and bushes.
Install the center collar, bearings and bushes to the
swingarm.
DUST SEAL CAP
LOCK NUT
RR. FORK END CAP
ADJUSTER NUT
CHAIN ADJUSTER
RR. SWING ARM
BUSH
SWING ARM PIVOT BOLT
PIVOT DISTANCE CENTER COLLAR
CHAIN SLIDER
O-RING CHAIN
To Next Page