DAF LF45 Series - 4. REMOVAL AND INSTALLATION

1
LF45/55 series Removal and installation
CAB SUSPENSION
4-1
4. REMOVAL AND INSTALLATION
4.1 REMOVING THE CAB STABILISER
Removing the cab stabiliser
Note:
If the cab has spring suspension, do not tilt the
cab without the cab stabiliser.
1. Open the grille.
2. Remove the cab stabiliser attachment bolts.
3. Remove the cab stabiliser.
Installing the cab stabiliser
1. Put the cab stabiliser in place.
2. Tighten the attachment bolts.
3. Inspect the cab for correct alignment, see
”Inspection and adjustment”.
K1 01 161
5
ǹ 0210
https://www.truck-manuals.net/