1
LF45/55 series Removal and installation
CAB SUSPENSION
4-13
4.9 REMOVAL AND INSTALLATION, COMPLETE CAB
Removing complete cab
Only use approved lifting
equipment.
Comply with general safety
instructions when working with
lifting equipment.
1. Disconnect the earth lead from the battery
terminal.
Note:
Work on the air conditioning unit should
only be carried out by qualified personnel.
2. If applicable, drain the air conditioning unit.
3. Drain the cooling water. Remove cooling
water pipes.
4. Tilt the cab forward. Remove the spring clip
from the selector rod. Pull the selector rod
apart.
5. Tilt the cab back and place wood blocks
under the cab, so that it does not go into the
locked position.
K1 01 213
5
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
