DAF LF45 Series User Manual

1
CAB SUSPENSION
Removal and installation LF45/55 series
4-12
4.8 REMOVAL AND INSTALLATION, CAB LOCKING MECHANISM
Removing cab locking mechanism
1. Tilt the cab until it is released from the cab
lock.
2. Support the cab using a hoist or place a
block or support underneath.
3. Switch the tilting pump to reverse tilting.
4. Remove the proximity switch connector at
the right-hand side.
5. Remove the hydraulic line (quick-release
coupling).
6. Remove the attachment bolts (2 and 3).
7. Remove the cab lock (1).
Installing cab lock mechanism
1. Fit the cab-locking mechanism (1).
2. Fit the attachment bolts (2 and 3) and
hand-tighten them.
3. Connect the hydraulic line.
4. Fit the connector of the cab tilting switch.
5. Carefully lower the cab. When doing so,
ensure that the locks are open.
6. Tighten the attachment bolts (2 and 3).
K1 01 203
2
1
3
5
ǹ 0210
https://www.truck-manuals.net/

DAF LF45 Series Specifications

General

Brand	DAF
Model	LF45 Series
Category	Trucks
Language	English