1
LF45/55 series Removal and installation
ACCESSORIES
3-1
3. REMOVAL AND INSTALLATION
3.1 REMOVAL AND INSTALLATION, ROOF SPOILER (AERODYNAMIC)
Removing roof spoiler (aerodynamic)
1. Remove the attachment nuts of the roof
spoiler.
2. Carefully detach the roof spoiler assembly
from the cab roof and carefully cut loose
any sealant between the spoiler and cab
roof.
3. Remove the residual sealant from the roof
cab and roof spoiler .
Installing roof spoiler (aerodynamic)
1. Degrease the cab roof at the positions
where the new sealant is to be applied.
2. Apply the specified sealant, see main group
”Technical data”, at the indicated positions
on the cab roof.
3. Fit the roof spoiler assembly to the cab
roof.
4. Fit the roof spoiler attachment nuts and
tighten the attachment nuts to the specified
tightening torque. See main group
”Technical data”.
K1 01 416
10
K1 01 417
10
8
ǹ 0210
https://www.truck-manuals.net/