1
LF45/55 series Safety instructions
ACCESSORIES
1-1
1. SAFETY INSTRUCTIONS
General
The cab is equipped with a hydraulic tilting gear .
The pump is located on co-driver’s side at the
rear of the cab. The cab locks are opened
hydraulically during pumping.
Before tilting the cab, make sure that the doors
are closed, that there are no loose items in the
cab and that the gear lever is in neutral. Tilt the
cab fully forward if work is to be carried out
underneath the cab.
You can stop the cab tilting forward
atanytimebyturningthetaptothe
reverse tilting position.
8
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
