1
LF45/55 series Removal and installation
CAB SUSPENSION
4-3
4. Remove the attachment bolt (1).
5. Remove the cab stabiliser attachment
bolts (2).
6. Remove the attachment bolt (3).
7. Remove the suspension attachment
bolt (4).
8. Remove the cab support.
Installing the cab support
1. Fit the support.
2. Check the distance between the cab
supports, see ”Technical data”.
3. Fit the attachment bolts (1) and (3)
hand-tighten them with the bolt heads on
the inside. Fit the attachment bolts (2) with
the bolt heads facing upwards. Fit the
attachment bolt (4) with the bolt head on the
outer side.
4. Remove the block.
5. Lower the cab and secure the attachment
bolt (3). Tighten the attachment bolt (1) to
the specified torque. See “Technical data”.
6. Remove the hoisting belt.
7. Inspect the cab for correct alignment, see
”Inspection and adjustment”.
8. Fit the headlight cover panel.
K1 01 204
1
4
3
2
5
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
