1
LF45/55 series Draining and filling
CAB TILTING GEAR
6-1
6. DRAINING AND FILLING
6.1 FILLING AND BLEEDING, TILTING MECHANISM
Filling and bleeding, cab tilting mechanism
Note:
The cab tilting pump and lifting cylinder are
self-bleeding.
The cab must be tilted completely back.
Check whether the lifting components have
been fitted correctly and whether the connected
piping is secure enough.
1. Fill the reservoir to the maximum level, see
fluids and lubricants specifications.
2. Put the pump in the forward tilting position.
3. Tilt the cab completely forward.
4. Tilt the cab all the way back.
5. Remove the filler plug and top up the oil.
6. Repeat this process three times to bleed the
whole system.
7. Fit the filler plug.
6
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
