1
LF45/55 series Safety instructions
SEATS
1-1
1. SAFETY INSTRUCTIONS
- Replace the seat belt if the belt is worn or
damaged.
- If the seat belts have been highly stressed
during a collision, the entire mechanism
must be replaced, even if no damage can
be observed.
- Always check the seat attachments for any
fractures or cracks after a collision.
- After a collision, always check whether the
seat attachment bolts have been subjected
to excessive stress.
- Do not use abrasive cleaning agents to
clean the seat belts; these may damage the
seat belt material.
- Seat repairs must be carried out by trained
technicians only .
- The illustrations in this manual usually
represent the left-hand seat or the left-hand
side. For the right-hand seat or right-hand
side, repairs are carried out in a similar way.
- After each repair, a functional test must be
carried out; in the case of pneumatic
repairs, also carry out an air-tightness test.
- Do not lean on the seat if the back rest has
been fully folded forwards.
- It is necessary, however, to restore the
routes of the air pipes and cables and their
connections in the original positions.
- Also keep to the proper colour position
when installing the air pipes.
- Air pipes and cables must not be kinked.
- In the case of transport and storage, ensure
that the seat is placed on its longitudinal
slides.
7
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
