1
LF45/55 series Removal and installation
INTERNAL CAB COMPONENTS
4-19
Steering wheel model with airbag
Observe the warnings and safety
instructions applicable to working
on an airbag system.
Removing the steering column with airbag
steering wheel
1. Remove the airbag module.
2. Place the steering box in the central
position using the marks.
S7 00 623
3. Remove the panel under the tachograph.
There must at least be 5 minutes
waiting time between disconnecting
the battery leads and loosening the
airbag connector. Non-observance
of the 5 minutes waiting time may
result in the airbag being activated
when the connector is removed.
4. Remove the steering column panel.
5. Depending on the work to be carried out,
remove the floor dust cover or the cover
panels under the steering wheel.
6. If applicable, remove the steering column
adjustment air pipe.
7. Remove the connectors from the steering
column.
2
ǹ 0210
https://www.truck-manuals.net/