1
LF45/55 series Removal and installation
INTERNAL CAB COMPONENTS
4-23
6. Fit the steering wheel puller
(DAF no. 1451995) on the steering wheel.
7. Make sure the bottom of the spindle (1) is
level with the bottom of the attachment
bolts (2).
8. Turn the spindle (1) approximately 10 mm
into the steering shaft.
9. Turn both attachment bolts (2)
approximately 10 mm into the steering
wheel.
10. Evenly tighten both attachment bolts (2)
alternately until the steering wheel comes
loose.
K1 01 324
212
Fitting the steering wheel without airbag
1. Fit the steering wheel (1) on the steering
shaft (3) so that the markings on the
steering wheel and steering shaft (A and B)
”align”. Ensure that the ridges on the rear of
the steering wheel fall into the recesses.
Check that the steering box is still in the
central position, if a new steering wheel is
fitted.
2. Fit the attachment bolt (2). Tighten the
attachment bolt to the specified torque, see
main group “Technical data”.
3. Fit the cover plate on the steering wheel.
K1 01 321
1
3
2
A
B
2
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
