Dahua Technology XVR4 Series User Manual

Local Configurations 231
Figure 5-199
Configure the settings for the register parameters. See Table 5-66. Step 2
Parameter
Description
Enable
Enable the register function.
Server IP Address
Enter the server IP address or the server domain that you want to
register to.
Port
Enter the port of the server.
Sub Service ID
This ID is allocated by the server and used for the Device.
Table 5-66
Click Apply to complete the settings. Step 3
5.16.1.12 Configuring Alarm Center Settings
You can configure the alarm center server to receive the uploaded alarm information. To use
this function, the Alarm Upload check box must be selected. For details about alarm event
settings, see "5.10 Alarm Events Settings."
Select Main Menu > NETWORK > ALARM CENTER. Step 1
The ALARM CENTER interface is displayed. See Figure 5-200.

Dahua Technology XVR4 Series Specifications

General

Brand	Dahua Technology
Model	XVR4 Series
Category	DVR
Language	English