Local Configurations 38
To secure the Device, it is strongly recommended for you to properly keep the password for
admin and modify it regularly.
Turn on the Device. Step 1
The Device Initialization interface is displayed. See Figure 5-1.
Figure 5-1
Configure the password information for admin. For details, see Table 5-1. Step 2
By default, the user is admin.
In the Password box, enter the password for admin.
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
In the Prompt Question box, enter the information that can remind
you of the password.
On the login interface, click , the prompt will display to help you
find back the password.
Table 5-1
Click Next. Step 3
The unlock pattern setting interface is displayed. See Figure 5-2.
To Next Page
Loading...
Need help?
General
