Local Configurations 53
In the Alternate DNS box, enter the IP address of alternate DNS.
In the MTU box, enter a value for network card. The value ranges from
1280 byte through 1500 byte. The default is 1500.
The suggested MTU values are as below.
1500: The biggest value of Ethernet information package. This
value is typically selected if there is no PPPoE or VPN connection,
and it is also the default value of some routers, network adapters
and switches.
1492: Optimized value for PPPoE.
1468: Optimized value for DHCP.
1450: Optimized value for VPN.
Click Test to test if the entered IP address and gateway are
interworking.
Table 5-5
5.1.4.5 Configuring P2P Settings
You can add the Device into your cell phone client or the platform to manage.
You can also configure P2P function by selecting Main Menu > NETWORK > P2P.
Make sure the DVR is connected into the Internet, and if yes, in the Status box of the P2P
interface, it shows Online.
After you have configured the network settings, on the NETWORK interface, click Step 1
Next.
The P2P interface is displayed. See Figure 5-19.
Figure 5-19
Enable the P2P function. Step 2
To Next Page
Loading...
Need help?
General
