62
Figure 4-28
Step 4 Click Apply button to save schedule record settings.
Note
Please enable auto record function so that the record plan can become activated. Refer to chapter
4.1.4.5.3 Record control for detailed information.
4.1.4.5.2 Schedule Snapshot
It is to set schedule snapshot period.
After set schedule snapshot, device can snapshot image according to the period you set here. For
example, the alarm snapshot period is from 6:00～18:00 Monday, device can snapshot during the 6:00～
18:00 when an alarm occurs.
Step 1 Click Snapshot button, device goes to following interface. See Figure 4-29.
Note
From main menu->Setting->Storage->Schedule->Snapshot, you can go to the snapshot
interface.
To Next Page
Loading...
Need help?
General