63
Figure 4-29
Step 2 Select a channel to set schedule snapshot.
Step 3 Set snapshot type as schedule. Refer to chapter 4.2.5.3 Snapshot for detailed information.
Step 4 Check the box to set alarm type. See Figure 4-30.
Figure 4-30
Note
When the record type is MD (motion detect), alarm, MD&Alarm, please enable the channel
snapshot function when corresponding alarm occurs. For example, when the alarm type is
MD, from main menu->Setting->Event->Video Detect->Motion Detect, please select the
snapshot channel and enable snapshot function. See Figure 4-31.
When the snapshot type is MD (motion detect), alarm, MD&Alarm, refer to chapter 4.7.1
Video detect, chapter 4.7.2 Alarm Settings.
To Next Page
Loading...
Need help?
General