Dahua NVR41 series User Manual

User's Manual
120
Parameter
Description
TCP Port
The default value is 37777. You can enter the value as
needed.
User Name
Enter the user name of the remote device.
Password
Enter the password of the user for the remote device.
Remote CH No.
Enter the remote channel number of the remote device that
you want to add.
Decoder Strategy
In the
Decoder Strategy
list, select
Default
,
Realtime
, or
Fluent
.
Protocol Type
● If the remote device is added through private protocol, the
default type is
TCP
.
● If the remote device is added through ONVIF protocol, the
system supports
Auto
,
TCP
,
UDP
, or
MULTICAST
.
● If the remote device is added through other manufacturers,
the system supports
TCP
and
UDP
.
Encrypt
If the remote device is added through Onvif protocol, selecting
the
Encrypt
check box will provide encryption protection to the
data being transmitted.
To use this function, the HTTPS function should be enabled for
the remote IP camera.
3. Click
OK
.
The remote device information is displayed on the
Added Device
list.
Step 3 Click
Next
to complete the remote device registration.
Click to change the remote device information. Click to delete remote device.
Once the multiple-sensor device has registered to the device system displays the
channel status on the Link info. See Figure 4-30. It shows one remote device has
occupied two channels: D1, D3.

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English