User's Manual
119
Add the device by manually configuring settings such as IP
address, channel selection.
Displays the added devices. You can edit and delete the device,
and view the device information.
Select the check box of the added device, and then click
Delete
to delete the added device.
Select the searched devices and then click
Import
to import the
devices in batches.
Select the added devices and then click
Export
. The exported
devices information is saved into the USB storage device.
● Manual Add
1. Click
Manual Add
.
The
Manual Add
interface is displayed. See Figure 4-29.
Figure 4-29
2. Configure parameters. See Table 4-8.
Table 4-8
In the
Channel
list, select the channel that you want use on
the Device to connect the remote device.
In the
Manufacturer
list, select the manufacturer of the remote
device.
In the
IP Address
box, enter the IP address of remote device.
The default is 192.168.0.0 which the system cannot connect
to.
To Next Page
Loading...
Need help?
General
