User's Manual
118
Figure 4-28
3. Set parameters. See Table 4-7.
Table 4-7
Enable the
Uninitialized
function, the uninitialized devices out of
the searched devices are displayed in the searched device list.
Select the uninitialized device from the uninitialized device list,
and the click
Initialize
to start initializing device.
In the
Show Filter
list, select the remote device type that you
want to display in the searched device list.
● None: Display all types of devices.
● IPC: Display the front-end devices.
● DVR: Display all storage devices such as NVR, DVR and
HCVR.
● OTHER: Display the devices that do not belong to IPC or
DVR type.
Displays the searched devices. You can view the device
information such as status, IP address.
Click
Search
, the searched devices display in the searched
device list.
To adjust the display sequence, in the title line, you can click the
IP address, Manufacturer, Type, MAC Address, Port, or Device
Name text. For example, click the IP address text, the sequence
icon is displayed.
"*" is displayed next to the added device.
In the Searched Device List area, select the device that you want
to add.
To Next Page
Loading...
Need help?
General
