User's Manual
215
This series NVR products support AI by camera only. Make sure the connected network
camera supports intelligent functions. For NVR, it just displays the intelligent alarm information
from the smart network camera and set or playback the record file.
Step 1 Select
Main menu
>
AI
>
Parameters
>
Smart Plan
.
The
Smart Plan
interface is displayed. See Figure 4-125.
Figure 4-125
Step 2 Select a channel number.
System displays different smart plan interfaces since the remote device may supports
different functions.
● The interface is shown as Figure 4-126, if the remote device supports preset
function.
To Next Page
Loading...
Need help?
General
