User's Manual
369
Figure 4-273
● On the top right of the live view screen, use the left mouse button or press Shift to
switch between (image switching is allowed) and (image switching is not
allowed) to turn on/off the tour function.
● On the navigation bar, click to enable the tour and click to disable it.
Step 2 Configure the settings for the tour parameters. See Table 4-93.
Table 4-93
Enter the amount of time that you want each channel group displays
on the screen. The value ranges from 5 seconds to 120 seconds,
and the default value is 5 seconds.
Select the View 1 or View 8 for
Motion Tour
tour and
Alarm Tour
Tour (system alarm events).
In the
Live Layout
list, select
View 1
,
View 4
,
View 8
, or other
modes that are supported by the Device.
To Next Page
Loading...
Need help?
General
