Click button , system goes to alarm status interface. It is to view device status and
channel status. Please refer to chapter 4.11.3.
4.6.11 Channel Info
Click button , system goes to the channel information setup interface. It is to view
information of the corresponding channel. See Figure 4-33.
Figure 4-33
4.6.12 Remote Device
Click , system goes to an interface for you to view remote device information. Please
refer to chapter 4.11.1.1.
4.6.13 Network
Click , system goes to the network interface. It is to set network IP address, default
gateway and etc. Please refer to chapter 4.11.2.
4.6.14 HDD Manager
Click ， system goes to the HDD manager interface. It is to view and manage HDD
information. Please refer to chapter 4.11.4.2.
4.6.15 USB Manager
To Next Page
Loading...
Need help?
General