Air Handling seq.- user manual
DKRCC.PS.RI.A1.02 / 520H4358 - Air Handling Seq. user manual - V 2.2
Produced by Danfoss Electronics spa Graphic Department, 10-2009
59
15| Parameters
The parameters are broken down into groups according to the type of function performed.
The characteristics described below are dened for each parameter; these can take on numerical values or can
depend on that of another parameter specied in the tag.
All characteristics described can be modied through the Congurator software “AHU_Interface_vNN.xls”.
Group1, Group2: indicates what group and subgroup the parameter displayed during navigation of the parameters
directory belong to:
Parameter: ID tag for the parameter. Unequivocally identies the parameter.
Description: describes the parameter shown on the LCD display
K: indicates a parameter that cannot be modied (constant with default value); does not appear on the display
Min: lowest possible value for the parameter
Max: highest possible value for the parameter
Default: factory-installed value
U.M: indicates the unit of measure
Decimals: number of decimal points
R/W: indicates whether the parameter is read only (RW=1), or in read-write mode (RW=0)
Visibility: species whether parameter visibility is a function of another parameter.
Level: the parameters are organized in 4 levels. Levels 1 to 3 are associated with a password. It is not
possible to display parameters of a level higher than the access level; on the other hand, it is
possible to view parameters belonging to levels lower than or equal to the access level
level 0 can be accessed without a password,
level 1, easy access, groups together the parameter which are not critical
for machine function and which are frequently modied;
level 2 groups together all parameter which are useful during machine installation;
level 3 groups together all parameter reserved for the manufacturer.
Text Values: list of mnemonic values that can be assumed by the parameter
The parameter display and modication mode is accessed from the Menu. For a complete description of the user
interface, (see ”2] User interface”).
15.1| Parameters table
See the Congurator software “AHU_Interface_vNN.xls” for the list of parameters.
»
»
»
»
To Next Page
Loading...
Need help?
General
