Chapter 19.0 Shipping Considerations
19.1 Vibration
When shipping the compressor as an integral part of a chiller unit, precautions should be taken to protect the
compressor motor cooling line from excessive vibration. Due to the flexibility of the compressor’s isolation mounts,
compressor vibration during transit can fracture the motor cooling line’s rigid piping. Danfoss LLC Applications
suggests the temporary installation of an anti-vibration bracket between the compressor’s base frame and
mounting rail during transit, as shown in Figure 19-1 Anti-Vibration Bracket.
Figure 19-1 Anti-Vibration Bracket
M-AP-001-EN Rev. S-9/8/2021 Page 113 of 136
To Next Page
Loading...
Need help?
General
