3.5.1 Overview 33
3.5.2 Bearing Control System 33
Chapter 4.0 Control Interface Wiring 35
4.1 Control Wiring Connection Guidelines 37
4.2 Interface Cable 38
4.3 Compressor I/O Board Mounting Details 39
4.3.1 Compressor I/O Board Mounting Instructions 39
Chapter 5.0 General Specifications 41
5.1 Construction 41
5.2 Maximum Pressure 41
5.3 Maximum Discharge Temperature 41
5.4 Suction Pressure Limits 42
5.5 Standards Compliance 43
Chapter 6.0 Electrical Specifications 45
6.1 Supply Voltage and Frequency 45
6.2 Voltage Sag Immunity 45
6.3 Compressor Current Limit and Operating Range Settings 45
6.4 Disconnects 47
6.5 Motor Insulation Class 47
6.6 AC Input Line/Power Electronic Component Protection 47
6.7 Power Line Contactor 48
6.8 CE Compliance and EMI/EMC Filtering 48
6.9 Surge Protection 49
6.10 Line Reactor 49
6.11 Harmonic Current Filtering (IEEE 519) 49
6.12 Grounding (Earth) Connection Guidelines 49
6.13 Equipment Panel 50
6.14 Mains Input Cable Specification 51
6.15 Idle Power Consumption 51
Page 4 of 136 - M-AP-001-EN Rev. S 9/8/2021
To Next Page
Loading...
Need help?
General
