Danfoss VLT 5000 FLUX - Flash Test

VLT
®
5000 FLUX
Programming
The key data of the unit can be read out via the
display or the serial communication port.
For example:ID 1,42 2 kB.
Database identification number, parameter 626:
The key data of the unit can be read out via the
display or the serial communication port.
For example: ID 1,14.
Power section identification number,
parameter 627:
The key data of the unit can be read out via the
display or the serial communication port.
For example: ID 1,15.
Application option type, parameter 628:
This gives the type of application options fitted
with the frequency converter.
Application option ordering number,
parameter 629:
This gives the ordering number for the
application option.
Communication option type, parameter 630:
This gives the type of communication options
fitted with the frequency converter
Communication option ordering number,
parameter 631:
This gives the ordering number for the
communication option.
639 FLASH TEST
Value:
✭Off (OFF)
[0]
On (ON)
[1]
Function:
Checks the consistency of the program in flash
proms during every power-up.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.55.A6.02 - VLT is a registered Danfoss trademark
119