Danfoss VLT 5000 FLUX User Manual

VLT
®
5000 FLUX
Introduction
■ Abbreviations and Definitions
■ Frequency converter
Abbreviation/Definition Description
I
VLT,MAX
The maximum output current of the frequency converter.
I
VLT,N
The rated output current of the frequency converter.
U
VLT,MAX
The maximum output voltage.
■ Output
Abbreviation/Definition Description
Break-away torque
f
M
The frequency transmitted to the motor
I
M
The current transmitted to the motor
n
min
Minimum speed [rpm]
n
max
Maximum speed [rpm]
n
JOG
Speed by jog operation [rpm]
U
M
The voltage transmitted to the motor
η
VLT
The efficiency of the frequency converter is defined as the ratio between the
power output and power input
■ Switch NO/NC
Abbreviation/Definition Description
NO Normally open
NC Normally closed
■ Input
Abbreviation/Definition Description
Control command
Immediate stop
Stop command
By means of LCP and the digital inputs, it is possible to start and stop the
connected motor.
MG.55.A6.02 - VLT is a registered Danfoss trademark
5

Danfoss VLT 5000 FLUX Specifications

General

Brand	Danfoss
Model	VLT 5000 FLUX
Category	DC Drives
Language	English