Danfoss VLT 5000 FLUX User Manual

VLT
®
5000 FLUX
Appendix
PNU Parameter Factory setting Range Changes 4-Setup Conversion Data
# description during operation index type
400 Brake function/overvoltage control Off Yes No 0 5
401 Brake resistor, ohm Depends on the unit Yes No -1 6
402 Brake power limit, kW Depends on the unit Yes No 2 6
403 Power monitoring Warning Yes No 0 5
404 Brake check Off Yes No 0 5
405 Reset function Manual reset Yes Yes 0 5
406 Automatic restart time 5 sec. 0 - 10 sec. Yes Yes 0 5
409 Trip delay torque 5 sec. 0 - 60 sec.
417 Speed PID proportional gain 0.015 0.000 - 5.000 Yes Yes -3 6
418 Speed PID integration time 200 ms 2.00 - 20.000
ms
Yes Yes -4 7
421 Speed PID low-pass filter 5/20 1-500 ms Yes Yes -4 6
445 Flying start Disable Yes Yes 0 5
458 LC-filter connected No 0-1 No Yes 0 5
459 Capacity LC-filter 2µF 0.1-100µF No Yes -1 6
460 Inductance LC-filter 7mH 0.1-100mH No Yes -1 6
462 Saturation brake Off 0-100% Yes Yes 0 6
463 AEO Cos Phi 0.91 = OFF 0.50-0.91 Yes Yes -2 S16
470 Adaptive Gain Scale 100% 20%-500% Yes Yes 0 U16
471 Adaptive Gain min speed 50 RPM 0-1500 RPM Yes Yes 67 U16
472 Adaptive Gain max speed 50 RPM 0-1500 RPM Yes Yes 67 U16
MG.55.A6.02 - VLT is a registered Danfoss trademark
135

Danfoss VLT 5000 FLUX Specifications

General

Brand	Danfoss
Model	VLT 5000 FLUX
Category	DC Drives
Language	English